Outer coating process is done in order to restore the aesthetic and functional properties of the teeth treatment. Outer coating process usually consists of several stages, and the time for completion of these stages, and the treatment plan may vary depending on the type of coating. The time was done veneers teeth usually 7-10 days it lasts, but in some cases this process may be shorter or longer.
The external structure of the coating process and stages of
- First inspection and planning:
In the first stage is to assess whether it is suitable for coating by examining the dentist's teeth. At this stage, the condition of the tooth coating material (porcelain, zirconium, Composite) and a treatment plan is determined. After reviewing the overall structure of your teeth, decides to be plated. This phase usually takes between 30 minutes to 1 hour. - Tooth Preparation:
From a slight etching of the tooth surface for the coating process must be made. During this process, a thin layer from the outer surface of the tooth is taken and will be placed in the area where the coating is prepared. Tooth preparation process is performed under local anesthesia and takes approximately 1 hour. A mold of the teeth is taken or digital scanning is performed after the etching process. - Ölçü Alınması:
After preparation of the tooth is measured and these measurements are sent to the laboratory. The natural structure of the tooth and the patient's aesthetic expectations in the lab in accordance with customized coating is prepared. The process usually measuring intake and laboratory 5 to 7 days it takes. - Temporary Coating:
While preparing a permanent coating to ensure protection and aesthetic appearance of the tooth is made from a temporary veneer. Temporary coating, and reduce tooth sensitivity laboratory is placed on the tooth to address aesthetic concerns in the process. This is a temporary coating is in place until the permanent crown is used. - The Modal Overlay Placement:
A permanent coating that is prepared in the laboratory, usually within 5-7 days will be ready. After the coating is placed on the tooth by the dentist is ready. At this stage, the coating on the outside to fit the necessary adjustments are made to make it look natural and aesthetically. Veneer is placed on the tooth after the transaction is completed and is secured with adhesive. This process takes approximately 1 hour.
Factors That Affect The Duration Of The Construction Outer Coating
- Materials Used:
Coating material (porcelain, zirconia, composite), the process can affect. Composite veneers can be completed in a single session by applying directly onto the teeth. Porcelain and zirconium coatings prepared in the laboratory and requires a longer process. - Status:
The process to have severely damaged your tooth or gum problems may extend. Also, at the bottom of the tooth needs to be treated for bruises if additional treatment time also can affect the completion time of the process. - Lab Time:
Preparation time usually takes between 5-7 days of the coating in the laboratory. In some cases, the density of the laboratory, or have a special structure that can extend the time of coating. - Temporary Coating:
Temporary using can affect the plating is made out of Plated. Temporary coatings are usually prepared quickly, but the process may extend the waiting time for the placement of the modal overlay.
Results
The outer coating process typically 7 to 10 days are to be completed within. The first examination, tooth preparation, laboratory measurements to be taken and the duration of the preparation phase in the coating influence. High-quality porcelain and zirconium coatings in the laboratory, such as specially prepared for the process, it may take a bit longer. However, the composite coatings can be completed in a single session. Your dentist will do as a result of the examination, you can get more clear information about the treatment plan and duration.
